Hydraulic crane OMTL-70-03 (70-04)  OMTL-70-03
The modification OMTL -70-03 was designed for operational comfort and reducing the time of initial hydraulic crane service and its folding into transport position.
The main distinction of this crane from OMTL -70-02 modification is that outriggers beams extension and folding of the outriggers into transport position are carried out by hydraulic drive.
OMTL-70-04
This modification of the hydraulic crane OMTL-70-03 is equipped with dual telescopic extender. The use of dual extender increases working area of crane (through increasing the max. boom out) and therefore reduces loading time of the trailer.
Hydraulic cranes are mounted behind the driver’s cab or on the rear part of the load platform of trucks URAL, KamAZ, MAZ, KrAZ and used as a part of specialize-purpose vehicles: metal scrap carrier, MPR (loading-unloading machine of “multilift” type) with proper working parts. Technical features
Lifting capacity diagram |  | | Working area |  | | Technical features | | Load moment, kNm | 70 | | Lifting capacity at the max. boom out , kg | 710 | | Lifting capacity at the boom length of 3 m, kg | 2000 | | Max. boom out, m | 8,6 | | Slewing angle of post, degree | 400 | | Hydraulic loader mass, kg (without working part, with rotator) | 2240 | | Working part mass, kg | 255 | | Sectional area of grabbing device at the closed jaws, m2 | 0,35 | | Slewing angle of rotator shaft, degree - endless | |
|
|
Русская версия
