Changeable working parts for Hydraulic loaders

Changeable working parts are special-purpose grabbing devices, used for operations with different kinds of loads that gives the possibility to considerably extend hydraulic loader application and provides their efficient productivity and university of their usage in different branches of national economy.

 Working parts are attached to hydraulic loaders OMTL and SF, manufactured by  Velmash-S Ltd. and SMZ, JSC respectively.

PL-70.40, PL-70.41, A-35, A-50 and PL-30.30 – are grapples used for operations with logs and purposed for loading, unloading, dragging and stockpiling timber. technical features PL-70.40 PL-70.41  A-35  A-50  PL-30.30  sectional area of the working part when closed jaws, m2 0,35 0,35 0,35 0,50 0,20 mass, kg 255 215 190 310 262

PL-70.40, PL-70.41 A-35, A-50 PL-30.30

PL-70.48 and  R-20 are pincer grapples used for chokerless skidding, dragging and stockpiling timber. technical features PL-70.48  R-20 sectional area of the working part when closed jaws, m2 0,35 0,2 mass, kg 260 120

PL-70.48 R-20

GL-1.00 is a 6- leaf (“orange peel”) grapple, used for operations with metal scrap. GL-2.00 is a 6- leaf (“orange peel”) grapple with reinforced metal construction used for operations with metal scrap and free shape materials. technical features GL-1.00  GL-2.00 capacity, m3 0,35 0,35 mass, kg 321 321

GL-1.00 GL-2.00

PL-70.43, PL-30.33 –  are bucket grapples with vertical arrangement of hydraulic cylinder, purposed for loading bulk solids and other materials,  digging trenches and ditches in unfrozen ground. technical features PL-70.43  PL-30.33 capacity, m3 0,35 0,20 mass, kg 276 247

PL-70.43, PL-30.33

PL-70.44 is a bucket grapple with horizontal arrangement of hydraulic cylinder, purposed for loading bulk solids and other materials. technical features PL-70.44 capacity, m3 0,35 mass, kg 262

PL-30.32 is a fork grapple with vertical arrangement of hydraulic cylinder, purposed for loading and unloading hay, silo, straw organic fertilizers, pressed hay rolls and those in hermetic packages produced by Perm-Salut complex. technical features PL-30.32 Max. forks opening, мм 1575 mass, kg 272

ZR-3 is a hay rolls grab used for handling hay rolls in hermetic packages produced by Perm-Salut complex. technical features ZR-3 Transportable roll mass, kg 1100 mass, kg 230

КМ-70.22 and КМ-70.23 are hook hangers, used for loading and unloading piece loads and packaged loads. technical features KM-70.22 KM-70.23 Transportable roll mass, kg 3200 2500 mass, kg 17 16

VP-1.00 is a pallet forks, used for handling pallet loads. technical features VP-1.00 Transportable load mass, kg 1500 forks opening, мм 300-750 mass, kg 107

UG-1.00 is a grabbing device used for handling curb and other subjects with rectangular cross section. technical features UG-1.00 Transportable load mass, kg 200 Transportable load dimensions (max.), mm 1000x160x300 mass, kg 21

UG-2.00 is a grabbing device used for handling holed loads. technical features UG-2.00 Transportable load mass, kg 80 Diameter of transportable load hole, mm 400-700 mass, kg 11